BeMatik - 4x1.5mm NL4 Speakon Speaker Cable 13GA 5m

Product Information

SpeakON connectors will have either a solder cup or a small captive screw type connection, which makes it easy to build your own speaker cables and repair them over time. NL2, NL4, and NL8 (or SpeakON) connectors are the industry standard in pro audio for connecting amplifiers to speakers.

NL4 Pro Speaker Cable, 6m - Gear4music 2-Pole NL4 Pro Speaker Cable, 6m - Gear4music

You can also use SpeakON breakout cables to adapt NL4 or NL8 connectors to another type of SpeakON connector. I’d recommend something like this Sescom NL4 breakout adapter if you’re looking for something that will last and be easy to repair. Thanks for another successful hire, super efficient as ever. I dropped the gear in the office.And again, as before, SpeakON connectors will have either a solder cup or a small captive screw type connection, which makes it easy to build your own speaker cables and repair them over time. When building them, you just need to make sure that you connect the positive and negative terminals of each pinset to the appropriate terminal on each side of the cable. Sweetwater Sound, 5501 U.S. Hwy 30 W, Fort Wayne, IN 46818 Get Directions | Phone Hours | Store Hours A speaker circuit consists of two wires – a positive and a negative. When talking about SpeakON connectors, this pair of wires is called a “pin set”.For customers in outlying areas of the country, the price of the Extended Warranty may be marginally higher, due to the potential for higher collection and redelivery transport costs.

NL4FX - Neutrik

Can someone please explain to me what they are, what they're used for, how do they work, cases where I should and shouldn't use them, pitfalls/warnings, etc? Thanks a bunch for your shared knowledge!!Services Guitar Workshop Electronic Repairs Workshop Music Store Events & Workshops Piano Showroom Music Lessons Recording Studio Why don’t we just change everything to standard NL4 connectors? This is something that we have considered – however, we always aim to keep our equipment as ‘industry standard’ specification where possible to maximise the integration with other systems, and when specifying systems we look at both manufacturer recommendations, as well as what our customers (and competitors) are doing to make the choice. Furthermore, not unlike the change over time from IEC to powerCON to TRUE1 connectors as a standardised power connection, the NLT4 looks to be here to stay. You can also use SpeakON breakout cables to adapt NL4 or NL8 connectors to another type of SpeakON connector. If you’re looking for something that will last and be easy to repair, Sescom NL4 breakout adapter is a good recommendation. NL8 – IPS NL8 cables use Neutrik NL8FC connections at each end, so are Female to Female. They are manufactured with eight core 2.5mm2 cable as standard and are wired straight through as with all other cabling. They can be extended using NL8 barrel joiners (which are Male to Male). Many speaker cabinets contain multiple loudspeaker drivers. In some cases, you might use a separate amplifier channel for each driver within the cabinet.

Van Damme NL4-NL4 cable (1.5M) - Sound Services

If an item can not be repaired, a similar alternative product or cash discount (as defined in this policy) will be offered For example, connecting a 2-channel amplifier to a 2-way speaker with an NL4 cable could allow you to power each driver with a separate amplifier. Deciding which speaker cable connectors you’ll need starts with choosing the right amplifier and speakers for the situation. How can you balance artistic vision and technical requirements in lighting design for Video over IP? To read full article with imagery, visit the link below: https://www.nmrevents.com/post/understanding-speakon-and-powercon-speaker-cable-connectorsThe Essentials 2-Pole NL4 Speaker Cable, 10m is ideal for hobbyists and home recordists. Suitable for sending a mono signal from your power amp to your speaker, the 2-Pole NL4 Speaker Cable will excel in its application. The main difference between NL2, NL4, and NL8 connectors is the number of speaker circuits each connector is capable of facilitating. I really must say how impressed I am with the DXR12 and Soundcraft EFX combination. The sound is just so good and so easy to use, relatively speaking. NL8T – Following a similar naming convention to the NL4T, IPS NL8T cabling uses Neutrik NLT8 FX-BAG (Female) connecters at one end, and Neutrik NLT8 MX-BAG (Male) connectors at the other. Like the NL4T cabling, each cable is effectively an extension lead and can be joined in series, or the male end can be mated to an NL8 cable. They are manufactured with eight core 4mm2 cable as standard and wired straight through all other IPS speakON cabling. The original and most common version of the powerCON is rated at 20 A. It comes in two deliberately incompatible variants to prevent people connecting two mains supplies together.

NL4 vs NL8 [Neutrik SpeakON Speaker Cable Connectors] NL2 vs NL4 vs NL8 [Neutrik SpeakON Speaker Cable Connectors]

All this equipment is ready to hire now from IPS, and individual items can be hired, or complete systems can also be supplied. If you have any questions on the best system and cabling options for your event, please get in touch with us to go through the options.The 2-Pole NL4 Speaker Twist Connection Pro Cable, 6m is precision engineered to provide the purest signal possible without the risk of noise and interference. This high quality cable will prove useful in all stage and studio applications. Its low-capacitance design provides a full frequency response with full dynamic range that will replicate every last nuance of its original source. The 2-Pole NL4 Speaker Twist Connection Pro Cable, 20m is precision engineered to provide the purest signal possible without the risk of noise and interference. This high quality cable will prove useful in all stage and studio applications. Its low-capacitance design provides a full frequency response with full dynamic range that will replicate every last nuance of its original source. Instead of running a separate NL2 cable from the amplifier to each cabinet, you could use one NL4 cable, which could carry the subwoofer signal on pin set 1 and the main speaker signal on pin set 2. I’d also like to give you my thanks to say that you have been wonderful to work with over this busy period. It’s been a learning curve for me and your patience while I learn various ropes has been much appreciated. Here’s to a successful event on the 24th and 25th and many more conference seasons to come!”